Learning Objectives

Learning Objectives

By the end of this section, you will be able to do the following:
  • Explain how banks act as intermediaries between savers and borrowers
  • Evaluate the relationship between banks, savings and loans, and credit unions
  • Analyze the causes of bankruptcy and recessions

The late bank robber named Willie Sutton was once asked why he robbed banks. He answered, “That’s where the money is.” While this may have been true at one time, from the perspective of modern economists, Sutton is both right and wrong. He is wrong because the overwhelming majority of money in the economy is not in the form of currency sitting in vaults or drawers at banks, waiting for a robber to appear. Most money is in the form of bank accounts, which exist only as electronic records on computers. From a broader perspective, however, the bank robber was more right than he may have known. Banking is intimately interconnected with money and consequently, with the broader economy.

Banks make it far easier for a complex economy to carry out the extraordinary range of transactions that occur in goods, labor, and financial capital markets. Imagine for a moment what the economy would be like if all payments had to be made in cash. When shopping for a large purchase or going on vacation you might need to carry hundreds of dollars in a pocket or purse. Even small businesses would need stockpiles of cash to pay workers and to purchase supplies. A bank allows people and businesses to store this money in either a checking account or savings account, for example, and then withdraw this money as needed through the use of a direct withdrawal, writing a check, or using a debit card.

Banks are a critical intermediary in what is called the payment system, which helps an economy exchange goods and services for money or other financial assets. Also, those with extra money that they would like to save can store their money in a bank rather than look for an individual that is willing to borrow it from them and then repay them at a later date. Those who want to borrow money can go directly to a bank rather than trying to find someone to lend them cash. Transaction costs are the costs associated with finding a lender or a borrower for this money. Thus, banks lower transactions costs and act as financial intermediaries—they bring savers and borrowers together. Along with making transactions much safer and easier, banks also play a key role in the creation of money.

Banks as Financial Intermediaries

Banks as Financial Intermediaries

An intermediary is one who stands between two other parties. Banks are a financial intermediary—that is, an institution that operates between a saver, who deposits money in a bank, and a borrower, who receives a loan from that bank. Financial intermediaries include other institutions in the financial market, such as insurance companies and pension funds, but they will not be included in this discussion because they are not considered to be depository institutions, which are institutions that accept money deposits and then use these to make loans. All the funds deposited are held in one big pool, which is then loaned out. Figure 13.4 illustrates the position of banks as financial intermediaries, with deposits flowing into a bank and loans flowing out. Of course, when banks make loans to firms, the banks will try to funnel financial capital to healthy businesses that have good prospects for repaying the loans, not to firms that are suffering losses and may be unable to repay.

The illustration shows the circular transactions between savers, banks, and borrowers. Savers give deposits to banks, and the bank provides them with withdrawals and interest payments. Borrowers give repayment of loans and interest payments to banks and the banks provide them with loans.
Figure 13.4 Banks as Financial Intermediaries Banks act as financial intermediaries because they stand between savers and borrowers. Savers place deposits with banks, and then receive interest payments and withdraw money. Borrowers receive loans from banks and repay the loans with interest. In turn, banks return money to savers in the form of withdrawals, which also include interest payments from banks to savers.

Clear It Up

How are banks, savings and loans, and credit unions related?

Banks have a couple of close cousins: savings institutions and credit unions. Banks, as explained, receive deposits from individuals and businesses and make loans with the money. Savings institutions are also sometimes called savings and loans or thrifts. They also take loans and make deposits. However, from the 1930s until the 1980s, federal law limited how much interest savings institutions were allowed to pay to depositors. They were also required to make most of their loans in the form of housing-related loans, either to homebuyers or to real-estate developers and builders.

A credit union is a nonprofit financial institution that its members own and run. Members of each credit union decide who is eligible to be a member. Usually, potential members would be everyone in a certain community, or groups of employees, or members of a certain organization. The credit union accepts deposits from members and focuses on making loans back to its members. While there are more credit unions than banks and more banks than savings and loans, the total assets of credit unions are growing.

In 2008, there were 7,085 banks. Due to the bank failures of 2007–2009 and bank mergers, there were 5,571 banks in the United States at the end of the fourth quarter in 2014. According to the Credit Union National Association (2015), as of December 2014, there were 6,535 credit unions with assets totaling $1.1 billion. A day of “Transfer Your Money” took place in 2009, because of general public disgust with big bank bailouts. People were encouraged to transfer their deposits to credit unions. This has grown into the ongoing Move Your Money Project. Consequently, some credit unions now hold deposits as large as $50 million. However, as of 2013, the 12 largest banks (0.2 percent) controlled 69 percent of all banking assets, according to the Dallas Federal Reserve (2015).

A Bank’s Balance Sheet

A Bank’s Balance Sheet

A balance sheet is an accounting tool that lists assets and liabilities. An asset is something of value that is owned and can be used to produce something. For example, the cash you own can be used to pay your tuition. If you own a home, it is also considered an asset. A liability is a debt or something you owe. Many people borrow money to buy homes. In this case, a home is the asset, but the mortgage is the liability. The net worth is the asset value minus how much is owed—the liability. A bank’s balance sheet operates in much the same way. A bank’s net worth is also referred to as bank capital. A bank has assets such as cash held in its vaults, monies that the bank holds at the Federal Reserve bank—called reserves—loans that are made to customers, and bonds.

Figure 13.5 illustrates a hypothetical and simplified balance sheet for the Safe and Secure Bank. Because of the two-column format of the balance sheet, with the T-shape formed by the vertical line down the middle and the horizontal line under “Assets” and “Liabilities,” it is sometimes called a T-account.

The assets on the left side of the T-account are as follows: loans ($5 million), U.S. Government Securities (USGS) ($4 million) and Reserves ($2 million). The assets on the left side of the T-account are Loans ($5 million), U.S. Government Securities (USGS) ($4 million) and Reserves ($2 million). The liabilities + net worth on the right side of the T-account are as follows: deposits ($10 million) and net worth ($1 million). There is nothing in the space across from U.S. Government Securities (USGS).
Figure 13.5 A Balance Sheet for the Safe and Secure Bank

The “T” in a T-account separates the assets of a firm, on the left, from its liabilities, on the right. All firms use T-accounts, though most are much more complex. For a bank, the assets are the financial instruments that either the bank is holding—its reserves—or those instruments where other parties owe money to the bank—like loans made by the bank and U.S. government securities, such as U.S. Treasury bonds purchased by the bank. Liabilities are what the bank owes to others. Specifically, the bank owes any deposits made in the bank to those who have made them. The net worth of the bank is the total assets minus total liabilities. Net worth is included on the liabilities side to have the T-account balance to zero. For a healthy business, net worth will be positive. For a bankrupt firm, net worth will be negative. In either case, on a bank’s T-account, assets will always equal liabilities plus net worth.

When bank customers deposit money into a checking account, savings account, or a certificate of deposit, the bank views these deposits as liabilities. After all, the bank owes these deposits to its customers, whenever the customers wish to withdraw their money. In the example shown in Figure 13.5, the Safe and Secure Bank holds $10 million in deposits.

Loans are the first category of bank assets shown in Figure 13.5. Say that a family takes out a 30-year mortgage loan to purchase a house, which means that the borrower will repay the loan over the next 30 years. This loan is clearly an asset from the bank’s perspective, because the borrower has a legal obligation to make payments to the bank over time. But in practical terms, how can the value of the mortgage loan that is being paid over 30 years be measured in the present? One way of measuring the value of something—whether a loan or anything else—is by estimating what another party in the market is willing to pay for it. Many banks issue home loans, and charge various handling and processing fees for doing so, but then sell the loans to other banks or financial institutions who collect the loan payments. The market where loans are made to borrowers is called the primary loan market, while the market in which these loans are bought and sold by financial institutions is the secondary loan market.

One key factor that affects what financial institutions are willing to pay for a loan when they buy it in the secondary loan market is the perceived riskiness of the loan: that is, given the characteristics of the borrower, such as income level and whether the local economy is performing strongly, what proportion of a loan of this type will be repaid? The greater the risk that a loan will not be repaid, the less that any financial institution will pay to acquire the loan. Another key factor is to compare the interest rate charged on the original loan with the current interest rate in the economy. If the original loan made at some point in the past requires the borrower to pay a low interest rate, but current interest rates are relatively high, then a financial institution will pay less to acquire the loan. In contrast, if the original loan requires the borrower to pay a high interest rate, while current interest rates are relatively low, then a financial institution will pay more to acquire the loan. For the Safe and Secure Bank in this example, the total value of its loans if they were sold to other financial institutions in the secondary market is $5 million.

The second category of bank asset is bonds, which are a common mechanism for borrowing, that are used by the federal and local governments, and also by private companies and nonprofit organizations. A bank takes some of the money it has received in deposits and uses the money to buy bonds—typically bonds issued by the U.S. government. Government bonds are low-risk assets because the government is virtually certain to pay off the bond, albeit at a low rate of interest. These bonds are an asset for banks in the same way that loans are an asset: The bank will receive a stream of payments in the future. In our example, the Safe and Secure Bank holds bonds worth a total value of $4 million.

The final entry under assets is reserves, which is money that the bank keeps on hand and is not loaned out or invested in bonds—and thus does not lead to interest payments. The Federal Reserve requires that banks keep a certain percentage of depositors’ money on reserve, either in their vaults or kept at the Federal Reserve Bank. This is called a reserve requirement. Monetary Policy and Bank Regulation will explain how the level of these required reserves is one policy tool that governments have to influence bank behavior. Additionally, banks may also want to keep a certain amount of reserves on hand in excess of what is required. The Safe and Secure Bank is holding $2 million in reserves.

The net worth of a bank is defined as its total assets minus its total liabilities. For the Safe and Secure Bank shown in Figure 13.5, net worth is equal to $1 million, that is, $11 million in assets minus $10 million in liabilities. For a financially healthy bank, the net worth will be positive. If a bank has negative net worth and depositors tried to withdraw their money, the bank would not be able to give all depositors their money.

Link It Up

For some concrete examples of what banks do, watch this video from SolmanClassroom, Move Your Money.

QR Code representing a URL

How Banks Go Bankrupt

How Banks Go Bankrupt

A bank that is bankrupt will have a negative net worth, meaning its assets will be worth less than its liabilities. How can this happen? Again, looking at the balance sheet helps to explain this.

A well-run bank will assume that a small percentage of borrowers will not repay their loans on time, or at all, and will factor these missing payments into its planning. Remember, the calculations of the expenses of banks every year includes a factor for loans that are not repaid—loan defaults—and the value of a bank’s loans on its balance sheet assumes a certain level of riskiness because of this factor. Even if a bank expects a certain number of loan defaults, it will suffer if the number of loan defaults is much greater than expected, as can happen during a recession. For example, if the Safe and Secure Bank in Figure 13.5 experienced a wave of unexpected defaults, and its loans declined in value from $5 million to $3 million, then the assets of the Safe and Secure Bank would decline and the bank would have negative net worth.

Clear It Up

What led to the financial crisis of 2008–2009?

Many banks make mortgage loans so that people can buy a home, but then do not keep the loans on their books as an asset. Instead, the banks sell the loans. These loans are securitized, which means that they are bundled together into a financial security that is sold to investors. Investors in these mortgage-backed securities receive a rate of return based on the level of payments that people make on all the mortgages that stand behind the security.

Securitization offers certain advantages. If a bank makes most of its loans in a local area, then the bank may be financially vulnerable if that local economy declines, so that many people are unable to make their payments. But if a bank sells its local loans, and then buys a mortgage-backed security based on home loans in many parts of the country, it can avoid being exposed to local financial risks. In the simple example in the text, banks just own bonds. In reality, banks can own a number of financial instruments, as long as these financial investments are safe enough to satisfy the government bank regulators' criteria. From the standpoint of a local homebuyer, securitization offers the benefit that a local bank does not need to have a large amount of extra funds to make a loan, because the bank is only planning to hold that loan for a short time before selling the loan so that it can be pooled into a financial security.

But securitization also offers one potentially large disadvantage. If a bank is going to hold a mortgage loan as an asset, the bank has an incentive to scrutinize the borrower carefully to ensure that the loan is likely to be repaid. However, a bank that is going to sell the loan may be less careful when making the loan in the first place. The bank may be more willing to make what are called subprime loans, which are loans that have characteristics like low or zero down payment, little scrutiny of whether the borrower has a reliable income, and sometimes low payments for the first year or two, which will be followed by much higher payments. Some subprime loans made in the mid-2000s were later dubbed NINJA loans: loans made even though the borrower had demonstrated No Income, No Job, or No Assets.

These subprime loans were typically sold and turned into financial securities—but with a twist. The idea was that if losses occurred on these mortgage-backed securities, certain investors would agree to take the first, say, 5 percent of such losses. Other investors would agree to take, say, the next 5 percent of losses. By this approach, still other investors would not need to take any losses unless these mortgage-backed financial securities lost 25 percent or 30 percent or more of their total value. These complex securities, along with other economic factors, encouraged a large expansion of subprime loan creation in the mid-2000s.

The economic stage was now set for a banking crisis. Banks thought they were buying only ultra-safe securities because even though the securities were ultimately backed by risky subprime mortgages, the banks only invested in the part of those securities that were protected from small or moderate levels of losses. But as housing prices fell after 2007, and the deepening recession made it harder for many people to make their mortgage payments, many banks found that their mortgage-backed financial assets could be worth much less than they had expected—and so the banks were staring bankruptcy in the face. During the 2008–2011 period, 318 banks failed in the United States.

The risk of an unexpectedly high level of loan defaults can be especially difficult for banks because a bank’s liabilities—namely the deposits of its customers—can be withdrawn quickly, but many of the bank’s assets such as loans and bonds, will only be repaid over years or even decades. This asset–liability time mismatch—a bank’s liabilities are withdrawn in the short term, while its assets are repaid in the long term—can cause severe problems for a bank. For example, imagine a bank that has loaned a substantial amount of money at a certain interest rate, but then sees interest rates rise substantially. The bank can find itself in a precarious situation. If it does not raise the interest rate it pays to depositors, then those deposits will flow to other institutions that offer the higher interest rates. However, if the bank does increase the interest rate it pays to depositors, it may end up in a situation where it is paying out a higher interest rate than it is collecting from past loans that were made at lower interest rates. Clearly, the bank cannot survive in the long term if it is paying out more in interest to depositors than it is receiving from borrowers.

How can banks protect themselves against an unexpectedly high rate of loan defaults and against the risk of an asset-liability time mismatch? One strategy is for a bank to diversify its loans, which means lending to a variety of customers. For example, suppose a bank specialized in lending to a niche market—say, making a high proportion of its loans to construction companies that build offices in one downtown area. If that one area suffers an unexpected economic downturn, the bank might suffer large losses. However, if a bank loans both to consumers who are buying homes and cars and also to a wide range of firms in many industries and geographic areas, the bank is less exposed to default risk. When a bank diversifies its loans, those categories of borrowers who have an unexpectedly large number of defaults will tend to be balanced out, according to random chance, by other borrowers who have an unexpectedly low number of defaults. Thus, diversification of loans can help banks to keep a positive net worth. However, if a widespread recession occurs that touches many industries and geographic areas, diversification will not help.

Along with diversifying their loans, banks have several other strategies to reduce the risk of an unexpectedly large number of loan defaults. For example, banks can sell some of the loans they make in the secondary loan market, as described earlier, and instead hold a greater share of assets in the form of government bonds or reserves. Nevertheless, in a lengthy recession, most banks will see their net worth decline because a higher share of loans will not be repaid in tough economic times.

Disclaimer

This section may include links to websites that contain links to articles on unrelated topics.  See the preface for more information.