Learning Objectives

Learning Objectives

By the end of this section, you will be able to do the following:

  • Understand Newton's third law of motion
  • Apply Newton's third law to define systems and solve problems of motion

The information presented in this section supports the following AP® learning objectives and science practices:

  • 3.A.2.1 The student is able to represent forces in diagrams or mathematically using appropriately labeled vectors with magnitude, direction, and units during the analysis of a situation. (S.P. 1.1)
  • 3.A.3.1 The student is able to analyze a scenario and make claims—develop arguments, justify assertions—about the forces exerted on an object by other objects for different types of forces or components of forces. (S.P. 6.4, 7.2)
  • 3.A.3.3 The student is able to describe a force as an interaction between two objects and identify both objects for any force. (S.P. 1.4)
  • 3.A.4.1 The student is able to construct explanations of physical situations involving the interaction of bodies using Newton's third law and the representation of action-reaction pairs of forces. (S.P. 1.4, 6.2)
  • 3.A.4.2 The student is able to use Newton's third law to make claims and predictions about the action-reaction pairs of forces when two objects interact. (S.P. 6.4, 7.2)
  • 3.A.4.3 The student is able to analyze situations involving interactions among several objects by using free-body diagrams that include the application of Newton's third law to identify forces. (S.P. 1.4)
  • 3.B.2.1 The student is able to create and use free-body diagrams to analyze physical situations to solve problems with motion qualitatively and quantitatively. (S.P. 1.1, 1.4, 2.2)
  • 4.A.2.1 The student is able to make predictions about the motion of a system based on the fact that acceleration is equal to the change in velocity per unit time, and velocity is equal to the change in position per unit time. (S.P. 6.4)
  • 4.A.2.2 The student is able to evaluate using given data whether all the forces on a system or whether all the parts of a system have been identified. (S.P. 5.3)
  • 4.A.3.1 The student is able to apply Newton's second law to systems to calculate the change in the center-of-mass velocity when an external force is exerted on the system. (S.P. 2.2)

‘Whether the stone hits the pitcher or the pitcher hits the stone, it’s going to be bad for the pitcher.’” This is exactly what happens whenever one body exerts a force on another—the first also experiences a force equal in magnitude and opposite in direction. Numerous common experiences, such as stubbing a toe or throwing a ball, confirm this. It is precisely stated in Newton’s third law of motion.

Newton’s Third Law of Motion

Whenever one body exerts a force on a second body, the first body experiences a force that is equal in magnitude and opposite in direction to the force that it exerts.

This law represents a certain symmetry in nature: Forces always occur in pairs, and one body cannot exert a force on another without experiencing a force itself. We sometimes refer to this law loosely as action-reaction, where the force exerted is the action and the force experienced as a consequence is the reaction. Newton’s third law has practical uses in analyzing the origin of forces and understanding which forces are external to a system.

We can readily see Newton’s third law at work by taking a look at how people move about. Consider a swimmer pushing off from the side of a pool, as illustrated in Figure 4.9. She pushes against the pool wall with her feet and accelerates in the direction opposite to that of her push. The wall has exerted an equal and opposite force back on the swimmer. You might think that two equal and opposite forces would cancel, but they do not because they act on different systems. In this case, there are two systems that we could investigate: the swimmer or the wall. If we select the swimmer to be the system of interest, as in the figure, then Fwall on feetFwall on feet size 12{F rSub { size 8{"wall on feet"} } } {} is an external force on this system and affects its motion. The swimmer moves in the direction of Fwall on feetFwall on feet size 12{F rSub { size 8{"wall on feet"} } } {}. In contrast, the force Ffeet on wallFfeet on wall size 12{F rSub { size 8{"feet on wall"} } } {} acts on the wall and not on our system of interest. Thus Ffeet on wallFfeet on wall size 12{F rSub { size 8{"feet on wall"} } } {} does not directly affect the motion of the system and does not cancel Fwall on feetFwall on feet size 12{F rSub { size 8{"wall on feet"} } } {}. Note that the swimmer pushes in the direction opposite to that in which she wishes to move. The reaction to her push is thus in the desired direction.

A swimmer is exerting a force with her feet on a wall inside a swimming pool represented by an arrow labeled as vector F sub Feet on wall, pointing toward the right, and the wall is also exerting an equal force on her feet, represented by an arrow labeled as vector F sub Wall on feet, having the same length but pointing toward the left. The direction of acceleration of the swimmer is toward the left, shown by an arrow toward the left.
Figure 4.9 When the swimmer exerts a force Ffeet on wallFfeet on wall size 12{F rSub { size 8{"feet on wall"} } } {} on the wall, she accelerates in the direction opposite to that of her push. This means the net external force on her is in the direction opposite to Ffeet on wallFfeet on wall size 12{F rSub { size 8{"feet on wall"} } } {}. This opposition occurs because, in accordance with Newton’s third law of motion, the wall exerts a force Fwall on feetFwall on feet size 12{F rSub { size 8{"wall on feet"} } } {} on her, equal in magnitude but in the direction opposite to the one she exerts on it. The line around the swimmer indicates the system of interest. Note that Ffeet on wallFfeet on wall size 12{F rSub { size 8{"feet on wall"} } } {} does not act on this system (the swimmer) and, thus, does not cancel Fwall on feetFwall on feet size 12{F rSub { size 8{"wall on feet"} } } {}. Thus the free-body diagram shows only Fwall on feetFwall on feet size 12{F rSub { size 8{"wall on feet"} } } {}, ww size 12{w} {}, the gravitational force, and BFBF size 12{ ital "BF"} {}, the buoyant force of the water supporting the swimmer’s weight. The vertical forces ww size 12{w} {} and BFBF size 12{ ital "BF"} {} cancel since there is no vertical motion.

Similarly, when a person stands on Earth, Earth exerts a force on the person, pulling the person toward Earth. As stated by Newton’s third law of motion, the person also exerts a force that is equal in magnitude, but opposite in direction, pulling Earth up toward the person. Since the mass of Earth is so great, however, and F=maF=ma, the acceleration of Earth toward the person is not noticeable.

Other examples of Newton’s third law are easy to find. As a professor paces in front of a whiteboard, she exerts a force backward on the floor. The floor exerts a reaction force forward on the professor that causes her to accelerate forward. Similarly, a car accelerates because the ground pushes forward on the drive wheels in reaction to the drive wheels pushing backward on the ground. You can see evidence of the wheels pushing backward when tires spin on a gravel road and throw rocks backward. In another example, rockets move forward by expelling gas backward at high velocity. This means the rocket exerts a large backward force on the gas in the rocket combustion chamber, and the gas therefore exerts a large reaction force forward on the rocket. This reaction force is called thrust. It is a common misconception that rockets propel themselves by pushing on the ground or on the air behind them. They actually work better in a vacuum, where they can more readily expel the exhaust gases. Helicopters similarly create lift by pushing air down, thereby experiencing an upward reaction force. Birds and airplanes also fly by exerting force on air in a direction opposite to that of whatever force they need. For example, the wings of a bird force air downward and backward in order to get lift and move forward. An octopus propels itself in the water by ejecting water through a funnel from its body, similar to a jet ski.

Example 4.3 Getting Up To Speed: Choosing the Correct System

A physics professor pushes a cart of demonstration equipment to a lecture hall, as seen in Figure 4.10. Her mass is 65.0 kg, the cart’s is 12.0 kg, and the equipment’s is 7.0 kg. Calculate the acceleration produced when the professor exerts a backward force of 150 N on the floor. All forces opposing the motion, such as friction on the cart’s wheels and air resistance, total 24.0 N.

A professor is pushing a cart of demonstration equipment. Two systems are labeled in the figure. System one includes both the professor and cart, and system two only has the cart. She is exerting some force F sub prof toward the right, shown by a vector arrow, and the cart is also pushing her with the same magnitude of force directed toward the left, shown by a vector F sub cart, having same length as F sub prof. The friction force small f is shown by a vector arrow pointing left acting between the wheels
Figure 4.10 A professor pushes a cart of demonstration equipment. The lengths of the arrows are proportional to the magnitudes of the forces except for ff size 12{f} {}, since it is too small to draw to scale. Different questions are asked in each example; thus, the system of interest must be defined differently for each. System 1 is appropriate for Example 4.4, since it asks for the acceleration of the entire group of objects. Only FfloorFfloor size 12{F rSub { size 8{"floor"} } } {} and ff size 12{f} {} are external forces acting on System 1 along the line of motion. All other forces either cancel or act on the outside world. System 2 is chosen for this example so that FprofFprof size 12{F rSub { size 8{"prof"} } } {} will be an external force and enter into Newton’s second law. Note that the free-body diagrams, which allow us to apply Newton’s second law, vary with the system chosen.

Strategy

Since they accelerate as a unit, we define the system to be the professor, cart, and equipment. This is System 1 in Figure 4.10. The professor pushes backward with a force FfootFfoot size 12{F rSub { size 8{"foot"} } } {} of 150 N. According to Newton’s third law, the floor exerts a forward reaction force FfloorFfloor size 12{F rSub { size 8{"floor"} } } {} of 150 N on System 1. Because all motion is horizontal, we can assume there is no net force in the vertical direction. The problem is therefore one-dimensional along the horizontal direction. As noted, ff size 12{f} {} opposes the motion and is thus in the opposite direction of FfloorFfloor size 12{F rSub { size 8{"floor"} } } {}. Note that we do not include the forces FprofFprof size 12{F rSub { size 8{"prof"} } } {} or FcartFcart size 12{F rSub { size 8{"cart"} } } {} because these are internal forces, and we do not include FfootFfoot size 12{F rSub { size 8{"foot"} } } {} because it acts on the floor, not on the system. There are no other significant forces acting on System 1. If the net external force can be found from all this information, we can use Newton’s second law to find the acceleration as requested. See the free-body diagram in the figure.

Solution

Newton’s second law is given by

4.18 a=Fnetm.a=Fnetm size 12{a = { {F rSub { size 8{"net"} } } over {m} } } {}.

The net external force on System 1 is deduced from Figure 4.10 and the discussion above to be

4.19 F net = F floor f = 150 N 24 . 0 N = 126 N . F net = F floor f = 150 N 24 . 0 N = 126 N size 12{F rSub { size 8{"net"} } = F rSub { size 8{"floor"} } -f ="150 N"-"24" "." "0 N"="126 N"} {} .

The mass of System 1 is

4.20 m=(65.0 + 12.0 + 7.0) kg = 84 kg.m=(65.0 + 12.0 + 7.0) kg = 84 kg size 12{m = \( "65" "." "0 "+" 12" "." "0 "+" 7" "." 0 \) " kg "=" 84 kg"} {}.

These values of F net F net size 12{F} {} and mm size 12{m} {} produce an acceleration of

4.21 a = F net m , a = 1 26 N 84 kg = 1 . 5 m/s 2 . a = F net m , a = 1 26 N 84 kg = 1 . 5 m/s 2 . alignl { stack { size 12{a= { {F rSub { size 8{"net"} } } over {m} } ,} {} # a = { {1"26 N"} over {"84"" kg"} } =" 1" "." "5 m/s" rSup { size 8{2} } "." {} } } {}

Discussion

None of the forces between components of System 1, such as between the professor’s hands and the cart, contribute to the net external force because they are internal to System 1. Another way to look at this is to note that forces between components of a system cancel because they are equal in magnitude and opposite in direction. For example, the force exerted by the professor on the cart results in an equal and opposite force back on her. In this case both forces act on the same system and, therefore, cancel. Thus internal forces between components of a system cancel. Choosing System 1 was crucial to solving this problem.

Example 4.4 Force on the Cart—Choosing a New System

Calculate the force the professor exerts on the cart in Figure 4.10 using data from the previous example if needed.

Strategy

If we now define the system of interest to be the cart plus equipment (System 2 in Figure 4.10), then the net external force on System 2 is the force the professor exerts on the cart minus friction. The force she exerts on the cart, FprofFprof size 12{F rSub { size 8{"prof"} } } {}, is an external force acting on System 2. FprofFprof size 12{F rSub { size 8{"prof"} } } {} was internal to System 1, but it is external to System 2 and will enter Newton’s second law for System 2.

Solution

Newton’s second law can be used to find FprofFprof size 12{F rSub { size 8{"prof"} } } {}. Starting with

4.22 a = F net m a = F net m size 12{a = { {F rSub { size 8{"net"} } } over {m} } } {}

and noting that the magnitude of the net external force on System 2 is

4.23 Fnet=Fproff,Fnet=Fproff size 12{F rSub { size 8{"net"} } = F rSub { size 8{"prof"} } -f} {},

we solve for FprofFprof size 12{F rSub { size 8{"prof"} } } {}, the desired quantity

4.24 F prof = F net + f . F prof = F net + f . size 12{F rSub { size 8{"prof"} } = F rSub { size 8{"net"} } + f} {}

The value of ff size 12{f} {} is given, so we must calculate net FnetFnet size 12{F} {}. That can be done since both the acceleration and mass of System 2 are known. Using Newton’s second law we see that

4.25 Fnet=ma,Fnet=ma size 12{F rSub { size 8{"net"} } = ital "ma"} {},

where the mass of System 2 is 19.0 kg (mm size 12{m} {}= 12.0 kg + 7.0 kg) and its acceleration was found to be a=1.5 m/s2a=1.5 m/s2 size 12{a=1 "." "50"" m/s" rSup { size 8{2} } } {} in the previous example. Thus,

4.26 Fnet=ma,Fnet=ma size 12{F rSub { size 8{"net"} } = ital "ma"} {},
4.27 Fnet=(19.0 kg)(1.5 m/s2)=29 N.Fnet=(19.0 kg)(1.5 m/s2)=29 N size 12{F rSub { size 8{"net"} } = \( "19" "." "0 kg" \) \( 1 "." "50 m/s" rSup { size 8{2} } \) ="28" "." 5" N"} {}.

Now we can find the desired force

4.28 Fprof=Fnet+f,Fprof=Fnet+f size 12{F rSub { size 8{"prof"} } =F rSub { size 8{"net"} } +f} {},
4.29 Fprof=29 N+24.0 N=53 N.Fprof=29 N+24.0 N=53 N size 12{F rSub { size 8{"prof"} } ="28" "." 5" N "+"24" "." "0 N "="52" "." "5 N"} {}.

Discussion

It is interesting that this force is significantly less than the 150-N force the professor exerted backward on the floor. Not all of that 150-N force is transmitted to the cart; some of it accelerates the professor.

The choice of a system is an important analytical step both in solving problems and in thoroughly understanding the physics of the situation which is not necessarily the same thing.

PhET Explorations: Gravity Force Lab

Visualize the gravitational force that two objects exert on each other. Change properties of the objects in order to see how it changes the gravity force.

This icon links to a P H E T Interactive activity when clicked.
Figure 4.11 Gravity Force Lab